INDUSTRIAL LUBRICANT
INDUSTRAL OIL
SLIDEWAY OIL
COMPRESSOR OIL
TURBINE OIL
DIN 51524 Part 1 (HL), Part 2
Denison HF-0, HF-1, HF-2
Eaton Vickers M-2950-S,
I-286-S
EATON104C
ISO 11158 Category HM, 11158
Cincinnati Milacron P-68, P-69, P70
ASTM6158-05HV
SAE MS1004
Performance Standard
Featured
Compound friction And anti-wear
Prevent oxidation well.
Excellent foam resistance.
Viscosity Grade of Product
HM 10
HM 22
HM 32
HM 37
HM 46
HM 68
HM 100
HM 150
Applications
Recommend to use for hydraulic system in many commercial industrials and constructions. It is suitable for circulating oil systems, bearings-journal, anti-friction, vane gear or axial piston pumps, mobile hydraulic oils power transmission systems, cranes and tractors.


HYDRAULIC OIL
BALLUBE HYDRAULIC OIL contains highly refined paraffinic, high viscosity index mineral oils incorporating good anti-wear, anti-rust, anti-oxidation, anti-foam as well as water separation properties. This is premium quality anti-wear hydraulic oils designed to provide maximum pump life and trouble-free service in industrial and mobile hydraulic systems. They possess proven protection against wear, outstanding oxidation and thermal stability.
Product attribute
HYDRAULIC OIL
Hydraulic oil products


PREMIUM HYDRAULIC OIL
BALLUBE: PREMIUM HYDRAULIC OIL is hydraulic oils formulated from high performance base stocks and high effective additives to satisfy a wide range of hydraulic equipment requirements. They provide excellent anti-wear protection, oxidation and corrosion inhibition. All viscosity grade have excellent demulsibility characteristics.
Product attribute
Cincinnati P68, P69, P70
Denison HF0, HF1, HF2
DIN 51524 PART 2 (HLP)
Eaton 35VQ25A
GM LS2
ASTM D 6158 Type HM
ISO 11158 Type H
Performance Standard
Featured
Compound friction And anti-wear
Prevent oxidation well.
Excellent foam resistance.
Viscosity Grade of Product
ISO Viscosity Grade # 10
ISO Viscosity Grade # 22
ISO Viscosity Grade # 32
ISO Viscosity Grade # 37
ISO Viscosity Grade # 46
ISO Viscosity Grade # 68
ISO Viscosity Grade # 100
ISO Viscosity Grade # 150
Applications
Recommend to use for hydraulic system in many commercial industrials and constructions. It is suitable for circulating oil systems, bearings-journal, anti-friction, vane gear or axial piston pumps, mobile hydraulic oils power transmission systems, cranes and tractors.


HYDRAULIC ZF PLUS
BALLUBE HYDRAULIC ZF PLUS is premium hydraulic oil formulated from high quality base oils and balanced additive system designed to satisfy a wide range of hydraulic equipment requirements. Special selected Zinc Free additives provide an excellent resistance against corrosion and rusting for ferrous and non-ferrous hydraulic parts and system. All grades have excellent demulsibility characteristics
คุณสมบัติของผลิตภัณฑ์
DIN 51524 PART 2,3
Denison HF0
GMLS2
Cincinnati Machine P-68, P-70, P-69
Eaton 35VQ25A
AFNOR NF E 48-603 HM
Performance Standard
Featured
Compound friction And anti-wear
Prevent oxidation well.
Excellent foam resistance.
Viscosity Grade of Product
ISO 32
ISO 46
ISO 68
ISO 100
Applications
Recommend to use for all types of high pressure, high speed hydraulic pump, hydraulic system where parts are made of copper or brass.
Note: Ballube Hydraulic ZF Plus Is product that refer to the manual of the machine. Mainly, and should use the viscosity number to meet the standards and instructions of the machine.
INDUSTRIAL GEAR OIL
Industrial Gear Oil Products


HYDRAULIC HVI
BALLUBE HYDRAULIC HVI is high quality, high viscosity index, formulated from high quality mineral base oils and balanced additive system designed to satisfy a wide range of hydraulic equipment requirements. It can also be used over a wider temperature range than conventional anti-wear hydraulic oils and compatible with other engine oils used in hydraulic applications. Excellent wear protection, anti-foam, anti-rust and seal protection.
Product attribute
DIN 51524 PART 2 , 3
DenisonHF0
GMLS2
Cincinnati Machine
P-68, P-70, P-69
Eaton35VQ25A
AFNOR NF E 48-603 HM
Performance Standard
Featured
Compound friction
And anti-wear
Prevent oxidation well.
Excellent foam resistance.
Viscosity Grade of Product
ISO 32
ISO 46
ISO 68
ISO 100
Applications
Recommended to use for all types of high pressure, high speed hydraulic pump, hydraulic system where ambient temperatures are encountered as plastic injection machine. On and off - highway industries including trucking, mining, construction and agriculture.
Note: Ballube Hydraulic HVI 's results is based on the instructions in the machine manual. Essentially, and should use the number Viscosity to meet the standards and instructions of the machine.


INDUSTRIAL GEAR OIL EP
BALLUBE INDUSTRIAL GEAR OIL EP ISO Viscosity Grade ranging from 68 to 460 are formulated to provide excellent extreme pressure characteristics and load carrying properties. These mineral-based Gear Oil have outstanding oxidation stability for better control of deposits under high pressure operation conditions, which help to reduce wear rate and extend equipment life. They can be used in circulating and splash lubricated systems, mist systems as well as industrial gear drives where full extreme pressure performance due to heavy or shock loading is needed.
Product attribute
DIN 51517 Part 3
AGMA 9005-E02
AISE 224
DavidBrown S1.52.101
Performance Standard
Featured
Made from lubricant
High quality basis
Extreme pressure and protection
Gear wear
Excellent foam resistance.
Long service life
Viscosity Grade of Product
ISO 68
ISO 100
ISO 150
ISO 220
ISO 320
ISO 460
ISO 680
Applications
Recommend to use for circulating and splash lubricated systems, mist systems as well as industrial gear drives where full extreme pressure performance due to heavy or shock loading is needed.
Note: Ballube Gear Oil EP is products that based on the instructions in the machine manual and should be used for viscosity in accordance with the standards and recommendations of the machine.
SLIDE WAY OIL
Sliding Oil Lubricants


SLIDE WAY OIL
Ballube, Slide Way Oil ( ISO VG 32, 68, 220) developed for using on a wide range of materials, use for machine tool slideway surfaces with anti stick-slip additive provide good frictional properties on metal to metal surface and allow more accurate positioning and improve finished surface quality as well as dimensional accuracy of workpieces. The products are also provide good anti-wear performance, good demulsification from many soluble cutting oils, excellent corrosion prevention and effective adhesion characteristics. Ballube slideway oils provides very effective adhesion to slideway surface so it can apply for both horizontal and vertical way slides industry.
Product attribute
DIN 51524 Part 1 (HL), Part 2
Denison HF-0, HF-1, HF-2
Eaton Vickers M-2950-S,
I-286-S
EATON104C
ISO 11158 Category HM, 11158
Cincinnati Milacron P-68, P-69, P70
ASTM6158-05HV
SAE MS1004
Performance Standard
Featured
Made from lubricant
High quality basis
Extreme pressure and protection
Gear wear
Excellent foam resistance.
Long service life
Viscosity Grade of Product
ISO 32
ISO 68
ISO 220
Applications
Blide Way Oil เหมาะสาหรับ
หล่อลื่นระบบรางเลื่อน ทั้งในแนวราบและแนวดิ่งของเครื่องจักรอุตสาหกรรม นอกจากนี้ยังสามารถใช้ในระบบรวมเกียร์และแบริ่งในเครื่องตัดกลึง
Note: Ballube Slide Way Oil is based on the instructions in the machine manual. Mainly, and should use the viscosity to meet the standards and instructions of the machine.
Lubricant turbine
TURBINE OIL


BALLUBE TURBINE OIL
Ballube Turbine Oil is premium quality steam turbines lubricant formulated with high refined mineral base oil with selected additives as high oxidation stability, protection against corrosion of ferrous and non-ferrous metals, resistance to foaming, water separation characteristics and sludge formation.
Product attribute
DIN 51515 Part 1 & 2
TLV 9013
BS 489
GE GEK 32568 A/C
CEGB 207001
Mitsubishi E00-87182
US Steel 120
Performance Standard
Featured
Made from lubricant
High quality basis
Extreme pressure and protection
Gear wear
Excellent foam resistance.
Long service life
Viscosity Grade of Product
ISO 32
ISO 46
ISO 68
ISO 100
ISO 150
ISO 220
Applications
It is recommended to use as steam turbines lubricating oil with good oxidation and thermal stability, long oil charge life in circulation systems and reduced oil replacement costs. It can also be used for general purpose R&O lubricating oil.
Note: Ballube Turbine Oil is Product that based on the instructions in the manual of the machine and should use the viscosity number to meet the standards and instructions of the machine.
CYLINDER OIL & MACHINE OIL
Compressed air products


GOLDEN DRAGON
Ballube Golden Dragon 30, 40, 50 are variety light color viscosity grade lubricating oil products which are used as multipurpose lubricating oil in industrial machine. They can also be used as drip feed lubrication, product coating.
Product attribute
Performance Standard
Heat resistant,
stable and non volatile
At high temperature
Do not react with parts of lubrication machinery.
Helps lubricate and extend machine life.
Viscosity Grade of Product
HM 30
HM 40
HM 50
Applications
Recommend for low-to-moderate machine speed and provide moisture stability, film stability and prolong machine life. It can also be used as once through drop for agricultural and farm machine.
Note: Ballube Golden Dragon is product that based on the instructions in the machine's manual. Mainly, and should use the viscosity number to meet the standards and instructions of the machine.


GREEN DRAGON
Ballube Green Dragon 30, 40, 50 are variety viscosity grade dark green color lubricating oil products which are used as multipurpose lubricating oil in industrial machine. They can also be used as drip feed lubrication, product coating.
Product attribute
Performance Standard
Heat resistant,
stable and non volatile
At high temperature
Do not react with parts of lubrication machinery.
Helps lubricate and extend machine life.
Viscosity Grade of Product
HM 32
HM 46
HM 68
HM 100
Applications
Recommend for low-to-moderate machine speed and provide moisture stability, film stability and prolong machine life It can also be used as once through drop for agricultural and farm machine.
Note: Ballube Green Dragon is product that based on the instructions in the machine's manual. Mainly, and should use the viscosity number to meet the standards and instructions of the machine.


MACHINE OIL 40
Ballube Machine Oil 40 is dark brown color lubricating oil products which are used as multipurpose lubricating oil in industrial machine. They can also be used as drip feed lubrication, product coating.
Product attribute
Performance Standard
is dark brown color lubricating oil products which are used as multipurpose lubricating oil in industrial machine. They can also be used as drip feed lubrication, product coating.
Viscosity Grade of Product
HM 30
HM 40
HM 50
Note: Ballube Machine Oil 40 is based on the instructions in the machine's manual and should be used in accordance with the standards and recommendations of the machine.
REFRIGERATION OIL


CYLINDER OIL
Ballube Cylinder Oil 90, 250 are made from high quality petroleum base stocks and used as once through feed system especially in saw mill and rice mill and are applied or used as lubricating for low-to–moderate speed machine.
Product attribute
Viscosity Grade of Product
HM 50
HM 90
HM 250


SPINDLE OIL 10, 22
BALLUBE SPINDLE OIL 10, 22 Spindle is premium performance Oils primarily designed for the lubrication of high-speed spindles in machine tools. Spindle oils are also used in some critical hydraulic, circulation systems and air-line oilers where the appropriate viscosity grade is selected. They are formulated from select high-quality, low viscosity base oils and additives that impart good resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and separate readily from water.
Product attribute
Viscosity Grade of Product
10
22
Applications
High speed spindle bearings in machine tools and equipment where high speeds and fine clearances are involved.
Precision grinders, lathes, jig borers and tracer mechanisms
Low pressure hydraulic systems where appropriate viscosity is selected
Systems containing a high degree of load carrying capability and anti-wear protection
Applications where thin oil-film corrosion protection
Note: Suitable for lubricating all kinds of weaving machines. Both steel and other metals. Available with both Circular Double Knit and Circular Single Knit machines.
REFRIGERATION OIL
Cooling Oil Products


REFRIGERATION OIL
BALLUBE refrigeration oils are special naphthenic oils blend with paraffinic oils that provide low pour points and good thermal and oxidative stability. BALLUBE refrigeration oils is formulated specifically for the lubrication of refrigeration compressors and to be completely compatible with CFC and Ammonia refrigerant gases. They have excellent low temperature performance, natural oxidation stability, good chemical stability and high thermal stability, and provide long lubricant life and reliable service. BALLUBE refrigeration oils are not recommended where HFC refrigerants such as R-134a and R-32 or where Sulphur dioxide is used as the refrigerants.
Product attribute
Performance Standard
DIN 51503 KAA, KE
Featured
ป้องกันการเกิดปฏิกิริยา Oxidation ได้ดี
ไม่แข็งตัว และอัตรการระเหยต่ำ
Viscosity Grade of Product
HM 30
HM 40
HM 50
Applications
BALLUBE refrigeration oils has been subjected to very special processing designed to produce stable, wax free, oils. It will not react with Ammonia refrigerants gases, floc at normal refrigeration temperature or oxidize at higher temperatures.
Compressed air products
COMPRESSOR OIL


COMPRESSOR OIL
Ballube Compressor Oil is premium quality lubricant developed for the lubrication of rotary sliding and screw air compressors. They are formulated with high performance refined base oil with selected additives that assures exceptional resistance to ashless oxidation inhibitor and thermal degradation, anti-wear and anti-foam.
Product attribute
DIN 51506 (VBL, VCL, VDL)
ISO/DP 6521 (DAA, DAB, DAH, DAG)
Performance Standard
Featured
Made from lubricant
High quality basis
Extreme pressure and protection
Gear wear
Excellent foam resistance.
Long service life
Viscosity Grade of Product
ISO 32
ISO 46
ISO 68
ISO 100
ISO 150
ISO 220
Applications
Recommend to use for Rotary oil-flooded screw and vane compressors. It can also be used for Heavy Duty Equipment, such as two-stage compressors operating at high temperatures and pressures.